Munitions India — BrandWiki

Munitions India

Overview

Munitions India Limited

type	Public Sector Undertaking
foundation	October 1, 2021
predecessor	Ordnance Factory Board
hq location	Ammunition Factory Khadki
hq location city	Pune
hq location country	India
key people	Sanjay Hazari (Chairman & Managing Director) Rakesh Ojha (Director Operations & Director HR)
owner	Government of India
divisions	Ammunition Factory Khadki Cordite Factory Aruvankadu High Energy Projectile Factory Tiruchirapalli High Explosive Factory Khadki Ordnance Factory Bhandara Ordnance Factory Bolangir Ordnance Factory Chanda Chandrapur Ordnance Factory Dehu Road Ordnance Factory Itarsi Ordnance Factory Khamaria Ordnance Factory Nalanda Ordnance Factory Varangaon
industry	Defence Production
products	Ammunition, Explosives, Rockets
website	https://munitionsindia.in

Munitions India Limited (MIL) is an Indian state-owned defence company, headquartered in Pune, India, established in 2021 as part of the restructuring and corporatisation of the Ordnance Factory Board into seven different Public Sector Undertakings.[1][2][3] Munitions India primarily manufactures ammunition, explosives, rockets and bombs for the use of the Indian Armed Forces, foreign militaries and domestic civilian use.

The budget allocated for MIL has seen an increase in the 2020s. The defence PSU was allocated a budget of Rs 577 crore in FY2023, Rs 580 crore in FY2024 (RE), and Rs 745.45 crore in FY2025, the highest among the seven defence PSUs. This is a part of the infrastructure modernisation plan, and to increase the war reserves of the Indian Armed Forces to sustain long-drawn wars. The sum is to be invested in modernising equipment, increasing production capacity, and including new manufacturing lines for ammunition of 30mm and 40mm grenade launchers.

Products

Under Development

Ramjet-Propelled Artillery Shell

As of February 2020, IIT Madras, in partnership with IIT Kanpur, Armament Research and Development Establishment and Research Centre Imarat, is working on redesigning an existing 155 mm shell using ramjet propulsion that can cover 60 km+ range. It will be made compatible with Haubits FH77, Dhanush, K9 Vajra-T and ATAGS. The shell will incorporate a Precision Guidance Kit for trajectory correction. IIT Madras will ensure that Munitions India can manufacture the shells. A number of technological advances have already been verified. The development team is awaiting product validation and prototyping now that the design is complete. Prototype is expected to be developed within three to four years.[6]

The project was started in 2020 by partnering with the Army Technology Board. Early trials of a scaled down system was conducted from an IIT Madras developed 76 mm gun confirmed the fundamental idea. Internal and external ballistics were validated by subsequent testing carried out in September 2025 at the School of Artillery, which successfully demonstrated clean gun exit, stable flight, and ramjet activation.[7][8]

With this approach, the range of conventional shells will be enhanced by 30–50% without losing their lethality. It was approved by the Army Technology Board. It can be retrofitted onto all the existing 155 mm artillery shells. As of December 2025, developmental tests at Pokhran Field Firing Range and IIT Madras had been successful, showing that the shell can depart the gun efficiently at wider operational zones.[9]

By 12 January 2026, IIT Madras successfully conducted successful in-house tests of the ramjet unit. The ramjet engine was incorporated into an in-service 155 mm artillery shell, replacing the traditional base bleed unit. The project is led by IIT Madras Aerospace Engineering department faculty P.A. Ramakrishna and retired Indian Army officer Lt General P R Shankar among others.[7] Range improvements were demonstrated in trials carried out on different artillery platforms. The range in K9 Vajra-T increased from 36 km to approximately 62 km, in Dhanush, the range is from approximately 30 km to approximately 55 km, and in ATAGS, it is from approximately 40 km to nearly 70 km.[10] A similar technology is expected to be developed for rocket artillery.[7]

155 mm Smart Artillery Shell

The development of 155 mm Smart Ammunition for the Regiment of Artillery by Munitions India and IIT Madras was reported in February 2024. The period of development is roughly two years. The goal is to improve the accuracy and lethality of artillery shells during terminal impact. The smart shell can be launched from 155 mm 39- and 45-calibre guns including Dhanush, ATAGS and K9 Vajra-T. It will achieve a circular error probable (CEP) of 10 m against 500 m CEP for conventional shells. It requires housing of miniaturize electronics and sensors package with guidance, navigation, and control system. To improve accuracy, the smart artillery round will use NavIC, with a GPS backup. It will be interoperable with all of the Indian Army's artillery guns to accommodate various tactical requirements. The smart shell will incorporate three-mode fuse operation, fin stabilization, and canard control.[11] A minimum range of 8 km and a maximum range of 38 km are anticipated. The smart shell will have three explosion modes: delayed, height of burst, and point detonation.[12][13]

Munitions India

Products

Under Development

Ramjet-Propelled Artillery Shell

155 mm Smart Artillery Shell

Ramjet-Propelled Artillery Shell

155 mm Smart Artillery Shell

Exports

See also

References