Construction
The first 242 production XK120s, hand-built with aluminium bodies on ash framing, were constructed between late 1948 and early 1950. To meet demand, and beginning with the 1950 model year, all subsequent XK120s were mass-produced with pressed-steel bodies. Aluminium doors, bonnet, and boot lid were retained. The DHC and FHC versions, more luxuriously appointed than the constantly exposed open cars, had wind-up windows and wood veneers on the dashboard and interior door caps.
The XK120’s steel chassis was mostly copied from the Jaguar Mark V, using many of the same parts.
The dual overhead-cam 3.4 L straight-6 XK engine was highly advanced for a mass-produced unit of the time, featuring a high-temperature, high-strength aluminum alloy cylinder head, hemispherical combustion chambers, inclined valves,[9] and twin side-draft SU carburetors. Using 80 octane fuel a standard 8:1 compression ratio developed 160 bhp. Most of the early cars were exported; a 7:1 low-compression version, with commensurately reduced performance, was reserved for the UK market, where the post-war austerity measures then in force restricted buyers to 70 octane "Pool petrol". The Jaguar factory's access to 80 octane fuel allowed it to provide cars with the higher compression ratio to the press, enabling journalists to test the model's optimum performance in Belgium, on a long, straight stretch of road between Jabbeke and Ostend.[10] The XK engine's basic design by William Heynes, later modified into 3.8 and 4.2-litre versions, survived until 1992.
All XK120s had independent Heynes designed torsion bar front suspension, semi-elliptic leaf springs at the rear, recirculating ball steering, telescopically adjustable steering column, and all-round 12-inch drum brakes which were prone to fade.[11] Some cars were fitted with Alfin (ALuminium FINned) brake drums to help overcome the fade.
The open two-seater provided little weather protection. Its lightweight folding canvas top and detachable sidescreens stowed out of sight behind the seats. The doors had no external handles; they were opened by an interior pull-cord, accessed through a flap in the sidescreens when the weather equipment was in place. The windscreen could be removed for aeroscreens to be fitted.
The drophead coupé (DHC) had a padded, lined canvas top, which folded onto the rear deck behind the seats when retracted, and roll-up windows with opening quarter lights. The flat glass two-piece windscreen was set in a steel frame that was integrated with the body and painted the same colour. Dashboards and door-caps in both the DHC and the closed coupé (FHC) were wood-veneered, whereas the open cars were leather-trimmed. All models had removable spats ("fender skirts" in America) covering the rear wheel arches, which enhanced the streamlined look. On cars fitted with optional centre-lock wire wheels (available from 1951), the spats were omitted as they gave insufficient clearance for the chromed, two-eared Rudge-Whitworth knockoff hubs. Chromium-plated wire wheels were optional from 1953. Factory standard 6.00 × 16-inch cross ply tyres were fitted on 16 × 5K solid wheels (Pre–1951), with 185VR16 Pirelli Cinturato radial tyres available as a later option.[12]
In addition to wire wheels, upgrades on the Special Equipment (SE) version (called the M version for Modified in the United States) included increased power, stiffer suspension and dual exhaust system.
